Installation Instructions; Symbol Description - Hansgrohe AXOR Bouroullec 19926000 Mode D'emploi / Instructions De Montage

*
Safety Notes
* Gloves should be worn during installation to prevent crushing and cutting
injuries.
* Observe all current and water lines when drilling!

Installation Instructions

• The product is only suitable for indoor use, f.e. in hotel rooms. It is not designed for
outdoor use, for example in the garden.
• The product should not be exposed to extremely moist or extremely dry air. The
commonly found air humidity, i.e. between 45 and 70%, is ideal.
• Prior to installation, inspect the product for transport damages. After it has been
installed, no transport or surface damage will be honoured.
• Before starting any mounting work, check all dimensions and installation positions.
• Where the contractor mounts the product, he should ensure that the entire area
of the wall to which the mounting plate is to be fitted, is flat (no projecting joints
or tiles sticking out), that the structure of the wall is suitable for the installation of
the product and has no weak points. The enclosed screws and dowels are only
suitable for concrete. For another wall constructions the manufacturer's indications
of the dowel manufacturer have to be taken into account.
• Preferably, use a router to cut holes out of the Corian® plate. In the absence of
a router, you can also use a 12 mm wood drill and a sabre saw with a new,
fine saw blade. Make sure that the cut-out contour has no pointed corners. If
you have any questions about working with Corian®, please contact directly the
manufacturer, DuPontTM.
CORIAN® Care instructions / spot removal
Standard household spots
Clean daily
Vinegar, coffee, tea, lemon juice, vegetables, dyes, ketchup
Lubricant, grease, and oil residues
Lime, soap, and mineral deposits
Pollen of lily, saffron, superficial scratches, cigarette burns,
shoe shine, ink, felt-tip pen
Mercurochrome, blood, red wine, perfume
Nail polish
Iron or rust
Iodine, mildew
4
English

Symbol description

Cleaning methods (Always clean the surface in circular
movements.)
Process
A.
A-B-C
B.
A-B-C-E C.
D.
A-B-C-D
A-B-F
E.
A-B-C-E
A-B-C-D-E
F.
A-B-C-G
A-B-C-H
A-B-C-E
G. Rub the spot using a plastic sponge scouring pad (f. e. Scotch-Brite®) and
H.
Assembly see page 32
Do not use silicone containing acetic acid!
Installation tool (see page 32)
Dimensions (see page 31)
Spare parts (see page 35)
Cleaning (see page 4)
and enclosed brochure
Special accessories (see page 35)
2 table legs incl. 4 sets of bottom attachment
Use a soft cloth to remove residues.
Rinse the surface with warm water and dry with a cloth.
Use a moistened cloth and a gentle scouring agent.
Rub the spot using a plastic sponge scouring pad (f. e. Scotch-Brite®) and an
ammonia-based cleaning agent for solid surfaces.
Rub the spot using a plastic sponge scouring pad (f. e. Scotch-Brite®) and
transparent household bleach. Immediately rinse the bleach off with plenty
of water, otherwise discolouring of the Corian® surface may occur. Rinse the
surface repeatedly with warm water and dry it with a soft cloth.
Rub the spot using a plastic sponge scouring pad (f. e. Scotch-Brite®) and a
standard household cleaner for removing lime deposits or vinegar. Rinse the
surface repeatedly with warm water and dry it with a soft cloth.
an acetone-free nail polish remover. Rinse the surface repeatedly with warm
water and dry it with a soft cloth.
Rub the spot using a foam sponge scouring pad (f.e. Scotch-Brite®) and a
metal cleaner or rust cleaner. Rinse the surface repeatedly with warm water
and dry it with a soft cloth.
#95853000