Turbo Function; Overflow; Starting And Stopping The Device - SilverCrest SKMK 1200 A1 Mode D'emploi

9.9 Turbo function

CAUTION:
When mixing liquids, the blender jug 5
must not contain more than 1 litre, since
otherwise liquid might be ejected.
Never use this function when the mixer
attachment 29 is used.
With the turbo function you can briefly select
speed setting 10 (maximum). This, for exam-
ple, is used to quickly chop nuts, small
amounts of herbs or onions.
- TURBO 18 lit white: the function is
possible.
- TURBO 18 lit red: the button is
blocked, the function is disabled (e.g.
because the food temperature inside the
blender jug exceeds 60 °C).
• Press and keep button TURBO 18
pressed for as long as you need the
function.
VITESSE
NOTES:
• The turbo function will only work
- if the blade assembly 27 is not turn-
ing.
- if the food temperature in the blender
jug 5 is less than 60 °C.
• The speed is promptly increased to set-
ting 10 (maximum).

9.10 Overflow

In the holder of the blender jug 9 there is an
overflow hole 10.
Should liquid escape from the blender
jug 5, this will not collect in the base
unit 12, but can escape via the overflow
hole 10 onto the surface.
9.11 Starting and stopping
the device
• After setting one or more values or a
programme, start the device by pressing
button MARCHE/ARRÊT 17.
• By pressing button MARCHE/
ARRÊT 17 again, you abort an
ongoing cooking or processing process.
10
51
GB