Resetting The Main Unit; Specifications; Main Unit; Wireless Subwoofer - Pioneer HTP-SB300 Mode D'emploi

Masquer les pouces Voir aussi pour HTP-SB300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional information

Resetting the main unit

Use this procedure to reset all the system's
settings to the factory default. Use the front
panel controls to do this.
1
Switch the system on.
2
While holding down the STEREO/A.L.C.
button on the front panel, press and hold
the HDMI1 button on remote control for
about two seconds.
3
Unplug the power cord.
The system has been reset to the factory
settings.

Specifications

Main unit

Amplifier section
Rated power output
Front . . . . 50 W per channel (1 kHz, 6 Ω, 10 %)
Center . . . . . . . . . . . . . . 50 W (1 kHz, 6 Ω, 10 %)
Input/Output section
HDMI terminal:
Input . . . . . . . . . . . . . . . . . . . . . . . . . . 19-pin x2
Output. . . . . . . . . . . . . . . . 19-pin (5 V, 100 mA)
Audio input. . . . . .Coaxial x1, Optical x1 (Digital)
Speaker section
Front speakers
Enclosure . . . . . . . . . . . . . . . . . Closed-box type
System . . . . . . . . . . 7.7 cm (3 in.) 1-way system
Speakers. . . . . . . . . . . . 7.7 cm (3 in.) cone type
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Ω
Frequency range . . . . . . . . . . .200 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . 100 W
Center speaker
Enclosure . . . . . . . . . . . . . . . . . Closed-box type
System . . . . . . . . . . 7.7 cm (3 in.) 1-way system
Speakers. . . . . . . . . .7.7 cm (3 in.) cone type x2
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . .12 Ω
Frequency range . . . . . . . . . . .200 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . 100 W
(magnetically shielded)
(magnetically shielded)
Miscellaneous
Power Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V/60 Hz
Power Consumption. . . . . . . . . . . . . . . . . . . . 40 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
Dimensions
. . . . . . . . 900 mm (W) x 108 mm (H) x 95 mm (D)
7
(35
/
in. (W) x 4
16
Weight (without package) . . . . . .2.9 kg (6 lb 7 oz)
Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Dry cell batteries (AAA size IEC R03) . . . . . . . . . 2
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Brackets (for main unit) . . . . . . . . . . . . . . . . . . . . 2
Wall mounting template . . . . . . . . . . . . . . . . . . . 1
Non-skid pads (for subwoofer) . . . . . . . . . . . . . . 4
Operating instructions (This document)

Wireless subwoofer

Amplifier section
Rated power output
Subwoofer . . . . . . . . 100 W (100 Hz, 4 Ω, 10 %)
Speaker section
Enclosure . . . . . . . . . . . . . . . . . . . Bass-reflex type
System . . . . . . . . . 16 cm (6
Speakers . . . . . . . . 16 cm (6
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ω
Frequency range . . . . . . . . . . . .40 Hz to 1 000 Hz
Maximum input power . . . . . . . . . . . . . . . . . 100 W
Miscellaneous
Power Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V/60 Hz
Power Consumption. . . . . . . . . . . . . . . . . . . . 25 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
Dimensions
. . . . . . . 411 mm (W) x 181 mm (H) x 215 mm (D)
7
(16
/
in. (W) x 7
16
Weight (without package) . . . . .4.4 kg (9 lb 12 oz)
Note
• Specifications and the design are subject
to possible modifications without notice,
due to improvements.
5
3
/
in. (H) x 3
/
in. (D))
16
4
5
/
in.) 1-way system
16
5
/
in.) cone type x1
16
13
1
/
in. (H) x 8
/
in. (D))
16
2
06
39
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières