Controls And Displays; Front Panel; Display - Pioneer HTP-SB300 Mode D'emploi

03

Controls and displays

Chapter 3
Controls and displays

Front panel

1 2
STANDBY/ON INPUT
4 5
1 Wireless indicator
Lights red or green, depending on status of unit.
Standby mode: Lights red
Power on, without wireless transmission
(subwoofer operation): Lights red
Power on, with wireless transmission
(subwoofer operation): Lights green

Display

1 AUTO
Lights when the Auto Surround feature is
switched on (page 21).
2 Character display
Displays various system information.
16
En
3
STEREO / A.L.C. VOLUME
6 7
1 2
4
2 IR remote sensor
3 Front panel display
See Display below for details.
 STANDBY/ON
4
Switches the system on or into standby.
5 INPUT
Selects an input source.
6 STEREO/A.L.C.
Switches between stereo playback, Auto level
control stereo mode (page 22) and Front Stage
Surround Advance modes (page 23).
7 VOLUME +/–
Adjusts the volume.
5 7
6
3 Sound Delay indicator
Displays the Audio Parameter sound delay
status.
4 DTS indicator
Lights when a source with DTS encoded audio
signals is detected.
3
8 7 9