Listening To Your System; Basic Operation; Auto Playback - Pioneer HTP-SB300 Mode D'emploi

Listening to your system

Chapter 4
Listening to your system
Important
• The listening modes and many features
described in this section may not be
available depending on the current source,
settings and status of the system.

Basic operation

Procedures for listening to audio from the
connected component.
SYSTEM
SYSTEM
INPUT SOURCE
INPUT TV CONTROL
HDMI1 HDMI2
CH
OPTICAL COAXIAL INPUT
TV CODE
STANDARD ADV SURR
AUTO/ STEREO/
VOL
DIMMER
DIRECT A.L.C.
LISTENING MODE BD MENU
1 Turn on the power of the playback
component.
Press  SYSTEM to turn on the power of
2
this system.
3 Select the source you want to playback.
Use INPUT SELECT (or front panel INPUT)
buttons.
4 Start playback of the component you
selected in step 1.
5 Select the listening mode.
Use the listening mode buttons.
Note
1 Stereo surround (matrix) formats are decoded accordingly using DOLBY PLII MOVIE (see Listening in surround
sound above for more on these decoding formats).
2 For more options using this button, see Using Stream Direct on page 23.
6
volume.

Auto playback

The simplest, most direct listening option is
the Auto Surround feature. With this, the
system automatically detects what kind of
source you're playing and selects
multichannel or stereo playback as
necessary.
•
ENTER
DIRECT
Press repeatedly until AUTO SURROUND
shows briefly in the display (it will then show
ANT
the decoding or playback format). Check the
MUTE
digital format indicators in the display to see
how the source is being processed.
Press MASTER VOLUME +/– to adjust the
1
TV CODE
STANDARD ADV SURR
AUTO/ STEREO/
DIMMER
DIRECT A.L.C.
LISTENING MODE
BD MENU
While listening to a source, press AUTO/
2
for auto playback of a source.
04
VOL
21
En