Nintendo 3DS Guide De Démarrage Rapide page 7

5
–1 AOSS Setup
Steps for the AOSS access point
AOSS button
5
–2 Wi-Fi Protected Setup
Steps for the Nintendo 3DS XL system
Steps for the access point
For Push-Button Connection
Wi-Fi Protected
Setup button
Press and hold the Wi-Fi Protected Setup button
on the access point until the LED blinks.
When the Setup Complete Screen is displayed, touch OK and perform a connection test.
If the connection test is successful, the settings are complete.
12
Press and hold the AOSS button on the access
point until the AOSS light flashes twice.
When the Setup Complete Screen is displayed,
touch OK and perform a connection test.
If the connection test is successful, the settings
are complete.
Touch the connection method that corresponds to your
access point.
For details on the connection methods available, refer to the
instruction booklet that came with the access point.
For PIN Connection
A PIN will be displayed on the Touch Screen.
Enter it in your access point's settings, then
touch NEXT.
5
–3 DON'T KNOW / NONE OF THESE
Search for the access point using your Nintendo 3DS XL system.
Steps for the Nintendo 3DS XL system
Touch OK to save your settings.
Touch OK and perform a connection test. If the connection test is successful, the settings are complete.
Touch the name of an access point from the list
Touch the name (also known as SSID, ESSID or Network Name)
that corresponds to your access point.
Enter the security key, then touch OK
Characters entered will appear as * on screen.
13