Vitrifrigo C51i Sea Classic Notice D'emploi page 29

EDITING THE PARAMETERS:
Press the SET key twice quickly (within 5 sec.).
The first time, the display will read "SET" and the second time, it will
show "0" or the parameter set previously.
Use the or keys to change the temperature setting for the
refrigerator.
Press the FNC key twice quickly to confirm the new temperature setting.
The first time, the display will read "SET" and the second time, it will
show the internal temperature.
A small dot below the word "OUT" indicates that the compressor and fan
are operating.
For the wiring diagram, see Fig. 8c/d/g (12/24V)
AN INSTRUCTION MANUAL FOR THE DIGITAL THERMOSTAT IS
SUPPLIED WITH EACH REFRIGERATOR IN ANY CASE.
29