Gb Suction Device 10-13 Pl; Package Contents; Technical Data; Explanation Of Symbols - Scheppach HD2P Mode D'emploi Original

Suction device
Suction hose Ø 40 mm
Hose coupling ø 35
Suction nozzle, flat / bore-suction nozzle
Installation dimensions L x B x H mm ..................................................................................................................................................435 x 345 x 230
Suction connector, connection D mm
Hose length mm ................................................................................................................................................................................................... 2000
Air flow rate m3/h ................................................................................................................................................................................................... 120
Pressure difference Pa .......................................................................................................................................................................................20000
Filter surface m2 ...................................................................................................................................................................................................0,175
Filter volume l ............................................................................................................................................................................................................... 5
Weight kg...................................................................................................................................................................................................................5,5
Drive:
Electric motor ................................................................................................................................................................................230 – 240 V / 50 Hz
Input power P 1 ..................................................................................................................................................................................................1250W
Engine speed 1/min .............................................................................................................................................................................................28000
Technical modifications reserved!
■ NOISE CHARACTERISTIC VALUES
Sound power level LWA ac-
cording to EN ISO 3744
Uncertainty K
Sound pressure level LpA
gemäß EN ISO 11201
Uncertainty K
Note: The indicated sound levels have been
determined according to a standardized test-
GB
ing procedure and can be used to compare
different power tools with each other. Further-
more, these values are suitable to evaluate
the loads that sounds can cause for the user
in advance.
Wear ear protection.
Wear a dust mask.
Wear eye protection.
Keep these operating instructions in a safe
place and pass them on to persons who use
the device.
Important information
Read the operating instructions carefully. Most
accidents with the suction unit happen due to
failure to observe the basic safety instructions.

Package contents

Suction-blowing nozzle
Filter bag
Operating instructions
............................................................................................................................................... 35
106,2 dB(A)
3 dB(A)
93,2 dB(A)
3 dB(A)
Attention! Depending on how you will use
the power tool, the actual values may deviate
from the indicated values. Take measures to
protect yourself from noise pollution. In this
process it is important to take the complete
sequence of operation into account.

Explanation of symbols

m

General information

Accidents can be avoided through early detec-
tion of potential dangers and the thorough
adherence to the safety instructions. Use the
suction system only in accordance with the
recommendations of the manufacturer.

Technical Data

Protection class II
The parts and sections of
these operating instruc-
tions concerning your
safety are marked with
this symbol.
10
This also includes moments during which the
power tool operates without load and mo-
ments during which it is turned off. Suitable
measures comprise amongst other things
regular maintenance and service of the power
tool and the insertion tools, regular breaks and
the appropriate planning of the sequences of
operation.
Please read the operating
instructions before using
this electric tool.
Attention! This device is only designed for the
use in dry locations. Do not use it in wet or
damp environments.
The parts and sections of these operating
instructions concerning your safety are
m
marked with this symbol: