Power Supply Specifications - Star SP2000 Série Mode D'emploi

Ambient temperature/humidity
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:
Mechanism reliability:
Print head life:

Power Supply Specifications

Power Supply:
Optional AC Adaptor:
Input:
Output:
Plug:
Consumption Current:
Operating:
(approximate averages)
Stand-by:
(approximate averages)
Important!
When using a printer power supply other than the optional AC adaptor (PS48-
24A), be sure that the following cautions are observed.
• Use a power supply of DC 24 V ±5% and more than 2.0 A.
• Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.
0°C to +50°C
10% to 80% RH (at 40°C, without condensa-
tion)
–20°C to +70°C
5% to 95%RH (at 40°C, without condensa-
tion)
5,000,000 lines MCBF (except head life and
auto cutter)
70 million characters
PS48-24A, switching type
90 to 264V AC, 50/60Hz
24V DC ± 5%, 2.0A
3-pin POWER JACK TCP 8927 (Hoshiden
brand or equivalent.)
Conditions: 24V, excluding perpheral unit
driving
Continuous ASCII printing: 0.7A
Solid block printing: 1.5A
Peak (solid printing): 3.1A
0.24 A
– 131 –