Power Switch And On Line/Feed Switch Combinations - Star TSP400Z Série Mode D'emploi

POWER indicator
Lights up to indicate that the printer's power is on.
HEAD UP indicator
Lights up to indicate that the print head unit is unlocked. Do not try printing while
this indicator is on. If this indicator comes on suddenly during printing, it is likely
that a paper jam has pushed the print head unit out of position.
No Paper Indicator
This indicator lights up when the printer runs out of paper and when no paper is
set.
When this indicator lights up, set a new roll of paper in the printer, then press the
ON LINE switch.
Error Indicator
This indicator lights up whenever an error occurs in the printer.

6-2. Power switch and ON LINE/FEED switch combinations

The following can be set when the power switch is turned on.
1) Power + FEED switches
(Turn the power on while holding the FEED switch depressed.)
1 short beep
2) Power + ON LINE switches
(Turn the power on while holding the ON LINE switch depressed.)
Approx. 2 sec.
1 short beep
HEAD UP LED
lights up
... Test print
... 2 short beeps
a
NO PAPER LED
lights up
– 10 –
Approx. 2 sec.
... 3 short beeps
b
ERROR LED
lights up
...
c