Optional Ac Adapter - Star SP2000 Série Mode D'emploi

Use the following procedure to install the optional AC adapter.
[Before AC adaptor installed]
1 Turn the printer over.
2 Plug the AC adapter's cord into the socket as shown in the above illustration.
Make sure the flat side of the plug is facing towards the inside of the printer.
3 Use one of the nylon fasteners that comes with the printer to fasten the cord
at the point indicated in the illustration.

4. Optional AC Adapter

AC adaptor
Fig. 4-1
AC adapter Adapter holder
AC adapter cord
[After AC adaptor installed]
Fig. 4-2 Flat side faces this way
– 6 –
Power code
Fasteners
Cord holder