Technical Data - EINHELL LE-BM 500E Mode D'emploi

Anleitung LE-BM 500 E SPK 1
Scope of delivery package
LE-BM 500 E,
Quick-change drill chuck 2 -13 mm,
Additional grip with bit stop
Description
1 Quick-change drill chuck
2 Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Selector button:
clockwise/anticlockwise
6 Speed control
7 Locking button
8 On/Off switch
01.10.2003 11:27 Uhr

Technical data

Voltage: 230 V ~ 50 Hz
Power rating:
Drilling capacity Concrete 13 mm
Steel 10 mm
Wood 20 mm
0 - 2800 min
No Load Speed
Safety insulated
Sound pressure
95 dB(A)
level LPA
Sound power
level LWA 106 dB(A)
15,3 m/s
Vibration a w
Weight
Caution
The LE-BM 500 E is not
designed for the operating of
auxiliary devices.
Do not use near steams or
inflammable liquids.
Only use sharp bits and suita-
ble screwing bits.
Remove the plug from the
socket for all adjusting and
cleaning work.
Protect the mains cable against
any damage. Oil and acids can
damage the cable.
Do not carry the device by the
mains cable.
Do not remove the plug from
the socket by pulling the mains
Seite 7
GB
500 W
-1
II /
2
1,9 kg
7