Brother E Série Manuel D'instructions page 131

u
1 2 1 2 3 3 4 4
A UTO
TEST TEST
S E T E T
t r
<Fixed stitch sewing> <Name label sewing>
Start point/end point
(Automatic thread trimming)
E
E
(Automatic thread timing)
<Example: Fixed stitch sewing>
b = Start backtack zigzag width
d = End backtack zigzag width
y
6 6 8 8 9 9
5 5 7 7
S S ROM
E
AUTO
F
E
TEST
F
F
A = Number of start
backtack stitches
E = Number of fixed
stitches
C = Number of end
backtack stitches
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
■ Automatic thread trimming function (B856E only)
• When setting fixed stitch/name label sewing, if the
thread trimming key r is pressed so that the indicator
t illuminates, the thread is trimmed automatically af-
ter the set number of stitches have been sewn when
the treadle is depressed continuously.
(When attaching name labels, the thread is trimmed
after each cycle.)
• When the fixed stitch/name label function is canceled,
the automatic thread trimming function is also can-
celed, and the thread trimming indicator t switches
off.
■ Automatic sewing (AUTO) function
• When setting fixed stitch/name label sewing, if the
AUTO key y is pressed so that the AUTO indicator u
illuminates, the number of setting stitches is sewn au-
tomatically simply by depressing the treadle once.
• When the fixed stitch/name label function is canceled,
the AUTO function is also canceled, and the AUTO in-
dicator u switches off.
E
■ Combining fixed stitches/name label sewing with
backtacking
The illustration shows an example of stitch combinations
using backtacking.
Note:
The set number of fixed stitches are sewn and sewing
then stops automatically, regardless of the zigzag stop
position setting.
LZ2-B855E,B856E 112