Vesta VAC-09CH Manuel D'installation Et D'utilisation page 50

Control form 2 - More functions
1. Tap the More button to operate additional functions if it appears on the screen.
Note: Some air conditioner model don't have the more button.
Note: The appearance maybe different, some icons will be hidden if the air conditional do no have this function
or do not enable on the current mode.
2. Tap the „Display" to switch on/off the indoor LED display
3. Tap the „Buzzer" to switch on/off the buzzing when operating through Wi-Fi APP.
4. Tap the „Anti-Mildew" button to activate the Anti-Mildew function, if it is available on the screen. After AC
turning off , it will start drying , reduce residual moisture and prevent mould, after function finish, it will auto-
matically turn off.
5. Tap the „Health" button to switch on/off the healthy function, if it is available on the screen. It activate the
antibacterial ioniser function.This function only for models with the ioniser generator.
6. Tap the „GEN Mode" button, if it is available on the screen. In this Mode, you can choose one of the three
levels of current. The air conditioner will maintain proper current to save energy.
7. Tap the „Electricity Monitoring" button if it is available on the screen. In this function, you can monitor the air
conditioner electricity consumption.
You can tap this button to pop up the calender then select the date.
Electricity Monitoring
8. Tap the „Self-Cleaning" button, if it is available on the screen. Check the details of the Self-Cleaning function
on User Manual.
9. Tap the „8 Heat" button , if it is available on the screen. This function help keep the room temperature over
8°C. Check the details of the 8 Heat function on User Manual.
10. Tap the „Reservation" button , if it is available on the screen. You can set the time, repeat day, tempera-
ture, mode, fan speed, air flow as you desired and then tap Save to activate the function. The air conditioner
will automatically reach your settings at the appointment time.
11.Tap the „Self-diagnosis" button, if it is available on the screen. The air conditioner will automatically diagno-
sis itself and indicate the Error code and the problem instructions if possible.
12. Tap the „Electricity Management" button if it is available on the screen.
• For technical update, there is maybe deviation of the actual items from what is on the manual. We
express our apologies. Please refer to your actual product and APP.
• Smart air conditioner APP can be altered without notice for quality improvement and also be dele-
ted depending on the circumstances of manufacturing firms.
• In case Wi-Fi signal strength is weakened, smart App may be disconnected. So make sure the
indoor unit near to wireless router.
• DHCP server function should be activated for wireless router.
• The internet connection may fail because of a firewall problem. In this case, contact your internet
service provider.
• For smart phone system security and network setting, make sure Smart air conditioner APP is
trusted
EN
NOTICE
50
KEN002VAC
v1• 11.11.2020