Vesta VAC-09CH Manuel D'installation Et D'utilisation page 46

KEN002VAC
EN
v1• 11.11.2020
AP mode
1. Power on the indoor unit, no need to launch the air conditioner.
2. Click „+" in the upper right corner of the „Home" screen or tap „Add device" on the room which has no
device.
3.Tap the „Split Air conditioner" logo.
4.Reset the Wi-Fi module by pressing the „DISPLAY" on the remote controller 6 times , or use a suitable tool to
press the reset button on the Wi-Fi module, until it shows „AP" on the indoor display, then tap"Next Step".
5.Input the password of the Wi-Fi which the same as your smart phone connected, tap „Confirm".
6.In the network setting screen, select „SmartLife-****", and tap" „.
7.You can see the percent rate of connecting process, at the same time PP","SA","AP" shining in turn on the
indoor display.
„PP" means „Searching the router"
„SA" means „connected to the router"
„AP" means „connected to the server"
46