Environmental Protection; Led Indicator - Ryobi RCD1201 Traduction Des Instructions Originales

cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Do not attempt to modify this tool or create accessories
not recommended for use with this tool.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.

LED INDICATOR

Battery charge
66% - 100%
33% - 66%
< 33%
NOTE: If only the red LED indicator is illuminated, it
means the battery power is low. The battery needs to be
recharged.
BATTERY OVERLOAD PROTECTION
This tool is designed to protect the battery from overloading.
When overloading is detected, the tool will automatically
switch off. To resume operation, switch the tool off and
on again. If the tool fails to operate, it means battery pack
is discharged and should be recharged in a compatible
charger.
SYMBOL
Safety alert
EurAsian Conformity Mark
CE conformity
Ukrainian mark of conformity
Please read the instructions carefully
before starting the machine.
2
LED colour
Green + Yellow + Red
Yellow + Red
Red
English
Recycle
Torque, maximum
Torque, minimum
Speed, minimum
Speed, maximum
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.