EN
■
Position the mains cable in such a way that it does not become squashed or bent and
does not come into contact with hot surfaces.
■
Switch off the device and pull the mains plug out of the plug socket if an error occurs
during operation or before a thunderstorm.
■
When you pull it out of the plug socket, always pull on the mains plug and never the
mains cable!
■
Never pull or carry the device by the mains cable.
■
Use only original spare parts from the manufacturer.
■
Protect the device from heat, naked fl ames, extreme temperatures, moisture, wet
conditions, direct sunlight and collisions.
■
The maximum loading capacity for the device is 120 kg. Do not exceed this so that
you do not damage the device.
NOTE – Risk of Damages to Material and Property from Batteries
■
Before inserting the batteries, check whether the contacts in the remote control and
on the batteries are clean; clean them if necessary.
■
Use only the battery type specifi ed in the technical data. Use high-performance al-
kaline batteries.
■
Always replace all the batteries at the same time. Do not use batteries of different
types or brands, or batteries with different capacities. When replacing batteries, note
the correct polarity (+/–).
■
Take the batteries out of the remote control when they are discharged or if the device
is not going to be used for a prolonged period. This will prevent any damage that
might occur if a battery leaks.
■
Remove dead batteries from the remote control immediately. Clean the contacts be-
fore you insert a new battery.
■
Batteries must not be recharged or reactivated by other means, dismantled, thrown
into a fi re, immersed in fl uids, or short-circuited.
Items Supplied
d
c
07125_de-en-fr-nl_A5_V2_2.indb 16
07125_de-en-fr-nl_A5_V2_2.indb 16
16
a Vibrating training device (1 x)
b Mains cable (1 x)
a
c Expander bands with grips (2 x)
d Remote control (1 x)
Not shown:
•
Batteries (1.5 V, AAA type) (2 x)
b
•
Poster with suggested exercises
•
These operating instructions
09.07.2018 09:16:00
09.07.2018 09:16:00