Battery Replacement - TEFAL Clipso Manuel D'instruction

You may encounter the following situations:
• If you start hearing regular beeps and the time
starts flashing, this means that the timer must
be attached onto the module. The symbol OK
should then appear.
• Your timer is programmed but you don't want
to use it any more: the pressure cooker stops
automatically after an hour or you can stop it
manually by pushing the + and – buttons
simultaneously.
• The timer is fragile and may become damaged
if it falls or if pressure is applied to the screen.
g
Never place the
timer in water,
or in the
dishwasher.
*depending on model
The lifetime of the battery depends on timer
usage frequency. However, you should replace
the battery when you notice total or partial loss
of display.
• In order to help to protect the environment,
remove the used battery. Do not throw it away
with the household waste, but dispose of it at
a local civic collection centre. The battery of the
timer is a button-type manganese alkaline
battery. It contains mercury. It complies with
European regulations.
• You can have the timer battery ref LR 54
(1131) replaced by an authorised service
dealer.
• To remove the battery from your timer , open
the battery cap as shown in the diagram
opposite.
• Gently close the battery cap, but don't force it
beyond the stop blocks as shown in the diagram
opposite.
Recommendations for use
• Do not force the battery cap when you close it.
• Should you lose the timer, you can obtain
another one from any of our TEFAL Approved
Service Centres.

Battery Replacement

EN
8