Scope Of Delivery; Instructions For Assembly - Hailo ProfiLine T350 Manuel D'utilisation Et D'installation

4. Scope of delivery

A ) Telescopic ladder 9113-131
B) Telescopic ladder 9113-111
1 x Telescopic ladder
1 x Use and Operating Instructions
1 x Crossbar
2 x M8 screw
2 x Washer
1 x Set of feet for crossbar
2 x Phillips screw

5. Instructions for assembly

The telescopic ladders 9113-131 and 9113-111 are equipped
with a crossbar that must be installed before using the ladder.
A screwdriver is required for installation.
Attaching the feet:
1. Attach both feet [H-1] on the crossbar [H] as shown.
Installing the crossbar:
2. Both screws [H-2] are pre-assembled in the ladder rails
and have fi rst to be removed. First insert the crossbar [H]
into the slots of the ladder rails [A].
The feet [H-1] have to be be aligned downward as shown.
3. Then screw the crossbar on both ladder rails tightly
(the nuts [H-3] are already pre-assembled in the end
caps of the ladder rail).
The telescopic ladders 9113-131 and 9113-111
must only be used with the
crossbar installed.
20 20
A)
B)
1.
2.
3.