Rehau EVERLOC+ XL Manuel D'instruction page 7

3. Lock expander head into position. Make certain expander head secures
with an audible click.
WARNING
Moving parts can crush and cut. This power tool uses a strong hydraulic
force to expand RAUPEX PEXa pipe. To reduce the risk of serious
personal injury during operation:
- Never touch the expander head during operation.
- Keep hands and other parts of your body away from the expander head
during operation.
WARNING
The power tool is designed for one-handed operation. To reduce the risk
of personal injury:
- Wrap the fingers of your trigger hand tightly around the control handle.
- Keep a secure grasp during work.
- Never grasp or support the power tool near the expander head.
- Use only your index finger to trigger the tool. Using other fingers to
trigger the tool may cause you to lose control of the power tool or cause
fingers to move toward moving parts.
4. To insert the battery, push it completely into the foot of the tool housing
until it locks into position
NOTICE
For use only with Makita batteries BL1830B, BL1840B or BL1850B.
5. Press the operating trigger for expansion. The power tool is designed
for one-handed operation. Wrap your fingers tightly around the control
handle as shown below and keep a secure grasp on the tool during work.
WARNING
Improper handling of the power tool can increase the risk of pinch or crush
injury. The tool is designed for one-handed operation and there are no
gripping surfaces outside of the control handle. To reduce the risk of
serious personal injury:
- Wrap your fingers tightly around the control handle as shown in this
manual.
- Keep a secure grasp on the tool during work.
- Use only your index finger to trigger the tool. Using other fingers to
trigger the tool may cause you to lose control of the power tool or
increase risk of personal injury, including pinch injuries.
- Keep hands away from the expander head during operation.
6. To expand RAUPEX pipe, fully insert expander head into the end of the
pipe. Be sure to expand pipe twice, ensuring the expander head is rotated
1/2 of one expander head segment between expansions.
7. To release the hydraulic pressure and return the tool to its starting
position, press the release button.
WARNING
In the event of a pinch, release the hydraulic pressure with the release
button.
8. Always return the tool to the starting position and remove the battery
before installing/removing the expander head.
WARNING
To reduce the risk of personal injury from accidental activation of the
power tool, always remove the battery pack before changing or adjusting
the expander head and before performing any other type of inspection,
maintenance or cleaning.
7