Standard Kit / Accessories; Main Parts / Specifications - Rehau EVERLOC+ XL Manuel D'instruction

- To reduce the risk of personal injury from accidental activation of the
power tool, always remove the battery pack before changing attach-
ments, inspecting, cleaning, lubricating or performing any other type
of maintenance, inspection, repair or cleaning.
- Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
- Do not expose the battery pack or tool to fire or excessive tempera-
ture. Exposure to fire or temperature above 265°F (130°C) may cause
explosion.
- Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior,
resulting in fire, explosion or increased risk of injury.
- Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
- Do not operate the power tool while under the influence of any
substance (drug, alcohol, medication, etc.) that might impair vision,
balance, dexterity or judgment.
- Working with a power tool can be strenuous. The operator must be in
good physical condition. To reduce the risk of injury from loss of control, be
alert. Do not operate the power tool when tired. Take a break if you become
tired. Always hold the tool firmly while working as directed in the instruction
manual.
- Make sure you have good balance and secure footing at all times. Use
caution when working from a ladder or other elevated platform. Do not
overreach.

3. STANDARD KIT / ACCESSORIES

EVERLOC+ XL Expander Tool Standard Kit
- EVERLOC+ XL expander tool
- Makita 18V Li-ion battery (BL1840B)
®
- Makita 18V Li-ion battery charger instruction manual
- Lubricant
- Cleaning brush
- Tool case
- Product Instruction Manual
Available Accessories
- EVERLOC+ XL Power Tool Standard Kit
- 1 1/4 in. expander head (quick change)
- 1 1/2 in. expander head (quick change)
- 2 in. expander head (quick change)
- Makita 18V Li-ion charger 120VAC (DC18RC)
- Large ratchet cutter
Spare, Makita 18V Li-ion Battery (BL1840B)
Contact Makita to purchase this item from your most convenient retailer.
Spare, Makita 18V Li-ion Charger 120VAC (DC18RC)
Contact Makita to purchase this item from your most convenient retailer.
WARNING
Pinching fingers or trapping other parts of your body in the expander head
can result in crush and cut injuries. To reduce the risk of serious injury:
- Wrap the fingers of your trigger hand tightly around the control handle as
shown in this instruction manual. The power tool is designed for one-hand-
ed operation.
- Never grasp or support the power tool near the expander head. Use only
your index finger to trigger the tool. Using other fingers to trigger the tool
may cause you to lose control of the power tool or cause other fingers to
move toward the moving parts.
- Keep a secure grasp during work.
4
WARNING
This EVERLOC+ XL expander tool is approved for use only with REHAU
expander heads. Although certain unauthorized accessories and attachments
may fit onto the power tool, their use may, in fact, be extremely dangerous
and result in personal injury and faulty joints, leaking and property damage.
WARNING
To reduce the risk of fire, electric shock and other serious personal injury or
property damage, use the power tool only with specified battery. Recharge
the battery only with the chargers and in the manner specified in the Makita
instruction manual. Read and follow the important safety warnings and
instructions provided with your charger and battery.
NOTICE
For proper installation, the expander head must match the dimension of the
PEXa pipe. Failure to mount the proper size expander head may result in
faulty joints, leaking and property damage

4. MAIN PARTS / SPECIFICATIONS

WARNING
To reduce risk of fire and electric shock, never operate the tool in the rain or
otherwise in damp or wet environments. Keep the tool, battery and charger
away from moisture, extreme heat and harsh detergents or solvents.
Technical Data
Battery voltage 18V
Battery Makita 18V Lithium-ion
BL1830B, BL1840B or BL1850B
Battery charge time Approx. 30 mins. for BL1840B
with DC18RC
Tool and battery 14°F to 104°F
operating temperature (-10°C to 40°C)
Noise level < 75 dB (A) at 3 ft (1 m) distance
Vibration level < 2.5 m/s²
(weighted eff. value of the acceleration)
Weight Approx. 6.9 lbs (3.1 kgs)
(basic tool with battery)
Charger operating 50°F to 104°F
temperature (10°C to 40°C)