Safety Definitions; Symbols On The Battery And/Or On The Battery Charger; Customer Assistance; Safety - Husqvarna 120i Manuel D'utilisation

Masquer les pouces Voir aussi pour 120i:

Manuel d'utilisation (380 pages)

Manuel d'utilisation (96 pages)

Manuel d'utilisation (41 pages)

Table des Matières

Les langues disponibles

(Fig. 12)

Chain brake, engaged (right). Chain brake,

disengaged (left).

(Fig. 13)

Chain oil fill.

(Fig. 14)

Direct current.

(Fig. 15)

Do not expose to rain.

(Fig. 16)

Environmental mark. The product or

package of the product is not domestic

waste. Recycle it at a recycling station for

electrical and electronic equipment.

(Fig. 21)

The rating plate shows serial number. yyyy

is the production year, ww is the production

week.

Note: Other symbols/decals on the product refer to

certification requirements for some markets.

Symbols on the product

(Fig. 2)

Risk of serious injury or death to the

operator or others. Be careful and use the

product correctly.

(Fig. 3)

Read the operator's manual carefully and

understand the instructions before operation

of the product.

(Fig. 4)

Wear approved protective helmet, hearing

and eye protection.

(Fig. 7)

Both of the operator's hands must be used

to operate the chainsaw.

(Fig. 8)

Do not operate the chainsaw holding it with

one hand only.

(Fig. 9)

Do not let the guide bar tip touch all objects.

(Fig. 10)

Warning! Kickback can occur when the

guide bar tip touches an object. This causes

the guide bar to be thrown in the direction of

the operator. Risk of serious injury or death.

(Fig. 11)

The direction in which the saw chain rotates

and maximum length of the guide bar.

(Fig. 12)

Chain brake, engaged (right). Chain brake,

disengaged (left).