Water Connection; High-Pressure Hose - Bosch GHP 5-55 Notice Originale

OBJ_BUCH-2319-004.book Page 13 Tuesday, May 16, 2017 11:15 AM
The connection between supply cord

and extension cord must kept dry and
off the ground 60 cm above.
Do not use the unit, if the power sup-

ply cord or important parts, e. g.
high-pressure hose, power gun or
safety devices are damaged.
Do not run over, crush or pull the

power supply cord or extension cord,
otherwise it may be damaged. Pro-
tect the cable from heat, oil and sharp
edges.

Water connection

Observe the regulations of your water

supply company.
The appliance should never be used

on the drinking water supply without
a back flow valve. Water which has
passed the back flow valve is regard-
ed as undrinkable.

High-pressure hose

High-pressure hoses, fittings and

couplings are important for the safety
of the appliance. Use only hoses, fit-
tings and couplings recommended by
the manufacturer.
A damaged high-pressure hose can

burst and must be replaced immedi-
ately. Never pull the hose over sharp
edges. Don't pull if the hose is entan-
gled.
Use of detergents
Only use detergents recommended

by the manufacturer. Comply with
the application, disposal and warning
instructions of the detergent manu-
facturers.
Bosch Power Tools
We recommend that the detergents

are not used undiluted. The products
are safe to use as they contain no ac-
ids, alkalis or substances which are
detrimental to the environment. We
recommend that the detergents are
kept out of the reach of children. If
detergent comes into contact with
the eyes, wash immediately with
plenty of water and if swallowed con-
tact a doctor immediately.
Do not use solvent-containing liq-

uids, undiluted acids, acetone or sol-
vents! This includes petrol, paint thin-
ners, heating oil. The sprayed vapour
is highly flammable, explosive and
toxic.
Observe before use
The operator must use the unit in ac-

cordance with the regulations.
He/she must take local conditions in-
to account and be aware of other peo-
ple, especially children, when operat-
ing the unit.
Before use, check that the unit and

operating equipment are in perfect
condition and are safe to operate. Do
not use the unit if it is not in perfect
condition.
The unit must be positioned on its

supports vertical or horizontal on sol-
id ground.
All current-conducting components

in the working area must be protect-
ed against splashed water.
The water jet from the high-
pressure nozzle produces a sig-
nificant recoil at the gun. There-
fore hold the gun and spray lance firmly
with both hands.
English | 13
1 609 92A 3EV | (16.5.17)