ADEUNIS Sigfox MOTION V2 Guide Utilisateur page 38

Sigfox MOTION V2 - Guide utilisateur / User guide version V2.0.1
Procedure to follow to program its registers according to the chosen mode.
FR
EN
A reading every X
I divide the X value
by 2 and I indicate it
S321 register
I save each reading
I indicate 1 in my S320
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (4 being
the maximum possible
in Sigfox without losing
Which mode do I want my device in?
Periodic
What period do I want between each reading?
seconds
in the
When do I save the information?
register
When will my frame be sent?
data)
Periodic
+
Alarm
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I want to scan regularly
for my alarm but I need
to save the information
every Y time
I indicate the Y value in
my S320 register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (4 being
the maximum possible
in Sigfox without losing
data)
I set my alarms : S330
for the presence and
S340 to S344 for
luminosity
Alarm on
exceeding
threshold
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my alarms : S330
for the presence and
S340 to S344 for
luminosity
Page 38 of 46