Platter Effect - Denon DN-D6000 Mode D'emploi

PLATTER EFFECT

13
*1
*2
*3
e r q
,
BRAKE
BRAKE
Simulates a winding-down sound of a turntable
coming to a full stop slowly.
Adds a echo sound when playback stops.
1
-1
Set the BRAKE mode
q The BRAKE function can
be turned on by pushing
the BRAKE button.
Select the BRAKE time
When the BRAKE turn on, the PARAMETERS
LED flashes and parameter are displayed.
If you use with default
settings, there is a 3 second
time out of inactivity for the
1 BRAKE button once selected
-2
and PARAMETERS knob if
adjusted. After 3 seconds, and
exits out of the BRAKE menu.
w t
,
w The BRAKE time can be
selected with the
PARAMETERS knob.
• When the PARAMETERS
knob is pushed, the time is
entered and the BRAKE
1
-2
time selection mode is
cancelled.
*1 BRAKE time is displayed on
play position indicater.
Start the BRAKE
1 The BRAKE is activated when the
1
-3
button is pushed during playback.
STOP the BRAKE
2 The BRAKE mode can be cancelled by
1
-4
pressing the button again during this
13
effect.
BRAKE mode off
When the BRAKE buttons is pressed, the
BRAKE time selection mode is set. If the
BRAKE button is pressed again during this
time, the BRAKE functions is turned off.
1
-5
RVS
Set the RVS mode
e The RVS function can be
turned on by pushing the
2 RVS/_DRAG-S button.
-1
Start the RVS (REVERSE) play:
3 Each push of the 13 button switches
between reverse playback and normal
playback.
*2 Play position indicator lights up in orange
during reverse playback.
2
-2
• The reverse play turns off when the Hot
Start or stutter is started.
13
RVS mode off
If the RVS buttons is pressed when in the
REVERSE MODE, the reverse mode is turned
off.
2
-3
ENGLISH
DRAG-S
DRAG-S (DRAG START):
Simulates the dragging sound of a turntable
starting up from a stop mode.
Set the DRAG-S mode
3
-1
r The DRAG-S function can
be turned on by pushing
the RVS/_DRAG-S button
for more than 1 sec.
Select the DRAG-S time:
When the DRAG-S turn on, the PARAMETERS
LED flashes and parameter are displayed.
If you use with default
settings, there is a 3 second
time out of inactivity for the
DRAG-S button once
selected and PARAMETERS
knob if adjusted. After 3
seconds, and exits out of the
DRAG-S menu.
3
-2
t The DRAG-S time can be
selected with the
PARAMETERS knob.
• When the PARAMETERS
knob is pushed, the time is
entered and the DRAG-S
time selection mode is
cancelled.
*3 DRAG-S time is displayed on play position
indicater.
Start the DRAG-S:
4 The DRAG-S is activated when playback is
3
-3
started with the 13 button.
DRAG-S mode off:
If the DRAG-S button is pressed for more than
1 sec, the DRAG-S time selection mode is set.
If the DRAG-S button is pressed again during
this time, the DRAG-S function is turned off.
3
-4
19