Milwaukee 2779-20 Manuel De L'utilisateur page 3

Connections made with this tool (2779-20) and combination of die and connector part
numbers in the charts below produce
classification standards.
Copper Short & Long Barrel Lugs & Splices
Anderson Blackburn Burndy
®
Splice
VHS, CSP,
VHSS CU
Model #'s
Lug
VHCL, CTL, YA, YAZ, YA-L,
VHCS CTL-2, YA-2L, YA-2LN,
Model #'s
CTL-L, YA-L-NT,
LCN YA-L-2NT,
YA-L-TC,
YA-L-2TC, YA-2N,
YA-TC, YA-2TC
Die
Wire Die Indentation
Size Color Cat. No. Mark
#8 AWG RED 49-12-U008C 8
#6 AWG BLUE 49-12-U006C 6
#4 AWG GRAY 49-12-U004C 4
#2 AWG BROWN 49-12-U002C 2
#1 AWG GREEN 49-12-U001C 1
1/0 AWG PINK 49-12-U01AC 1/0
2/0 AWG BLACK 49-12-U02AC 2/0
3/0 AWG ORANGE 49-12-U03AC 3/0
4/0 AWG PURPLE 49-12-U04AC 4/0
250 MCM YELLOW 49-12-U250C 250
300 MCM WHITE 49-12-U300C 300
350 MCM RED 49-12-U350C 350
400 MCM BLUE 49-12-U400C 400
500 MCM BROWN 49-12-U500C 500
600 MCM GREEN 49-12-U600C 600
750 MCM BLACK 49-12-U750C 750
Dual Rated Lugs & Splices
Anderson Blackburn Burndy
®
Splice
VACS ASP
Model #'s
Lug VACL ATL
YA-ATN
Model #'s
Die
Wire Die Indentation
Size Color Cat. No. Mark Anderson Blackburn
#8 AWG BLUE 49-12-U008 8
#6 AWG GRAY 49-12-U006 6
#4 AWG GREEN 49-12-U004 4
#2 AWG PINK 49-12-U002 2
#1 AWG GOLD 49-12-U001 1
1/0 AWG TAN 49-12-U01A 1/0
2/0 AWG OLIVE 49-12-U02A 2/0
3/0 AWG RUBY 49-12-U03A 3/0
4/0 AWG WHITE 49-12-U04A 4/0
250 MCM RED 49-12-U250 250
300 MCM BLUE 49-12-U300 300
350 MCM BROWN 49-12-U350 350
400 MCM GREEN 49-12-U400 400
500 MCM PINK 49-12-U500 500
600 MCM BLACK 49-12-U600 600
750 MCM YELLOW 49-12-U750 750
UL Classified crimps according to the UL 486A-B
c us
ILSCO Panduit Penn-Union
YS, CT, SCH, BBCU,
YS-L, CTL SCL, BCU
YS-T SCS,
SCSS
CLN, CLW, LCA, BBLU,
CRA,CRB, LCAS, BLU
CRA-L, LCB,
CRB-L, LCC,
CRA-2L, LCD
CRB-2L,
CSW
Lugs: Total # of Crimps
Splices: # of Crimps per Side
Anderson Blackburn Burndy ILSCO Panduit Penn-Union T&B
®
1 1 1 1
1
2
Lugs: 2
Splices: N/A
2 2 2 2
2
ILSCO Panduit Penn-Union
YS-A AS, SA BCUA
ASN
YA-A, ACL, ACN, LAA, BLUA
ALND, ALNS, LAB
2ACL, 2ACN
Lugs: Total # of Crimps
Splices: # of Crimps per Side
® Burndy ILSCO Panduit Penn-Union
Lugs: N/A Lugs: 1
Splices: 1 Splices: N/A
1 1
1 1
2 2 2 2 2
3 3 3 3 3
4
Volts
Direct Current
T&B
Underwriters Laboratories, Inc.
54504-54523-TB,
United States and Canada
54804-54823
WARNING
54104-54123-TB,
and property damage, do not use on live
54204-54223,
electrical lines. Tool is NOT insulated.
54850BE-54880BE,
Contact with a live circuit could result in
54930BE-54923BE
severe injury or death. Turn off power
before making a crimp.
WARNING
is in use. Fingers could be crushed.
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Read operator's manual.
1 1
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Battery
To remove the battery, push in the release buttons
2 2
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Always remove battery pack before
WARNING
changing or removing accesso-
ries. Only use accessories specifically recom-
mended for this tool. Others may be hazardous.
T&B
An incomplete or faulty crimp could
60501-60578
WARNING
cause a fire. Use tool only with
MILWAUKEE "U" dies and connectors for which
60101-60178,
they are rated. Jaws, dies, and connectors must
60230-60278
be used in an approved combination to achieve
a successful operation. Improper combinations
can result in a faulty crimp. Electric shock, fire,
explosion, and property damage could occur.
T&B
Changing the Dies
Lugs: 1
Inspect dies and connectors before use. Only use
Splices: N/A
1
properly matched dies and connectors for the crimp-
ing jaws. Refer to Specifications for die/connector
1
compatibility.
1. Remove the battery pack.
2. Snap the appropriate dies into each side of the
crimping jaws.
3. To remove, press the release button for each side
2 2
of the crimping jaws. Pull dies out from crimping
jaws.
3 3
SYMBOLOGY
To learn more about the ONE-KEY functionality for
this tool, please reference the Quick Start guide in-
cluded with this product or go to milwaukeetool.com/
One-Key. To download the ONE-KEY app, visit the
App Store or Google Play from your smart device.
To reduce the risk of WARNING
explosion, electric shock
damage, do not use on live electrical lines.
Tool is NOT insulated. Contact with a live
circuit could result in severe injury or death.
Turn off power before making a crimp.
Keep hands away from crimping jaws
while tool is in use. Fingers could be
Keep hands away from
crushed.
crimping jaws while tool
Always remove battery pack before changing
or removing accessories. Only use accessories
specifically recommended for this tool. Others
may be hazardous.
To reduce the risk of injury, wear safety goggles
or glasses with side shields.
Before crimping:
ASSEMBLY
• Inspect the jaws and dies for cracks or other dam-
age. Do not use damaged jaws or dies. Contact a
MILWAUKEE service facility.
• Ensure dies are properly installed.
• Jaws, dies, connectors, and cables must be used in
an APPROVED COMBINATION. Improper combina-
tions can result in a faulty crimp.
• Inspect and discard workpieces with cracks or wear
before use. Materials may crack or shatter.
• Follow connector manufacturers' installation instruc-
tions. Other uses may cause damage to the tool,
accessories, and workpiece.
1. Install the dies.
2. Insert battery pack.
3. Rotate the jaws to the desired angle. Hold tool
securely. Press and hold the trigger.
4. When the cycle is complete the tool will switch
off and the indicator will light. Release the trigger.
Press and hold the reverse trigger to manually
return the crimping jaws.
NOTE: After the cycle reaches a certain point, the
crimp may automatically finish, even if the trigger
is released.
LED
Indicator
Solid Green Tool completed the operation and
Solid Red
Flashing Red Tool did NOT complete the operation.
Flashing
Red/Green
(after Solid
Green or
Solid Red)
5
ONE-KEY™
OPERATION
To reduce the risk of explosion,
electric shock and property
Crimping
Definition
reached full crimping pressure.
Tool completed the operation but did NOT
reach full crimping pressure.
Tool has reached its service interval
(20,000 crimps). Red/Green flashing
will begin after the solid Red or Green
indicator for the operation is displayed.
MILWAUKEE
recommends that the
tool be inspected and preventative
maintenance completed. Return tool to
MILWAUKEE service facility.
a