Cycle Selection Charts; Canceling A Cycle - Whirlpool DUL300XTLB2 Guide D'utilisation Et D'entretien

Cycle Selection Charts

Select the wash cycle and options desired. The dishwasher starts
filling once you press a cycle, unless you select a delay wash.
You can select an option as the machine is filling.
After a wash cycle, the dishwasher remembers the options used
and uses the same options in the next wash cycle unless new
options are selected or Cancel is selected.
A " " shows what steps are in each cycle. Your model may have
some or all of the cycles shown.
Display time is for models with the dual digit display on the
console.
These models meet the ENERGY STAR
efficiency.
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
Use this cycle for all day-to-day
soil types, including both
normal and heavy soils, giving
you exceptional cleaning
performance combined with
reassuring sanitization.
Initial display time after rotating
clock pattern: 86-94 min
Pre- Main Rinse Rinse
Wash Wash
130°F 145°F
(54°C) (63°C)
Use this cycle for hard-to-clean,
heavily-soiled pots, pans,
casseroles, and regular
tableware.
Initial display time after rotating
clock pattern: 84-92 min
Pre- Main Rinse Rinse
Wash Wash
130°F 140°F
(54°C) (60°C)
Use this cycle for loads with
normal amounts of food soil.
(The energy-usage label is
based on this cycle.) During the
main wash, the wash action will
repeatedly pause for several
seconds.
Initial display time after rotating
clock pattern: 73-90 min
Pre- Main Purge Rinse
Wash Wash
120°F
(49°C)
14
® guidelines for energy
Use both
detergent
dispenser
sections.
Final Dry Mini- Water
Heated mum Usage
Rinse Time (gal/L)
(min)
91* 6.9-10.4/
160°F Light 26.1-39.3
(71°C) soil
Use both
detergent
dispenser
sections.
Final Dry Mini- Water
Heated mum Usage
Rinse Time (gal/L)
(min)
89* 6.9-10.4/
140°F Light 26.1-39.3
(60°C) soil
Use both
detergent
dispenser
sections.
Final Dry Mini- Water
Heated mum Usage
Rinse Time (gal/L)
(min)
72* 5.9-10.1/
140°F Light 22.3-38.2
(60°C) soil
Use this cycle for china and
crystal. This cycle uses a light
wash and gentle dry. During the
heated dry, the heating element
cycles on and off.
Initial display time after rotating
clock pattern: 65-73 min
Rinse Main Purge Rinse
Wash
120°F
(49°C)
Use this cycle for pre-rinsed or
lightly-soiled loads. This cycle
automatically adds a fill and brief
pre-wash, purging the hot water
line and improving wash results,
without adding time for water
heating periods.
Initial display time after rotating
clock pattern: 42-46 min
First Fill Pre- Main Rinse
Water Wash Wash
Temp.
Greater
than
135°F
(57°C)
Use this rinse cycle for rinsing
dishes, glasses, and silverware
that will not be washed right
away.
Initial display time after rotating
clock pattern: 4 min
Pre- Main Rinse Rinse
Wash Wash
*If the incoming water is less than the recommended temperature
or food soils are heavy, the cycle will automatically compensate
by adding time, heat, and water as needed.

Canceling a Cycle

Anytime during a cycle, press
If your dishwasher has a dual-digit display, it shows
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after
2 minutes.
NOTE: If your dishwasher does not need draining, the light
turns off. Select a new cycle and options.
Use main
detergent
dispenser
section.
Final Dry Mini-
Heated mum
Rinse Time
(min)
71*
135°F cycled
(57°C)
Use main
detergent
dispenser
section.
Rinse Final Dry Mini-
Heated mum
Rinse Time
(min)
44*
Do not use
detergent with
this cycle.
Final Dry Time
Heated (min)
Rinse
10
Water
Usage
(gal/L)
5.9-8.4/
22.3-31.8
Water
Usage
(gal/L)
5.2-7.8/
19.7-29.5
Water
Usage
(gal/L)
1.8-2.7/
6.8-10.2