Safety Regulations; Layout And Items Supplied; Proper Use - Trueshopping SF20703 Mode D'emploi D'origine

ENGLISH
Danger!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage. Please
read the complete operating instructions and safety
regulations with due care. Keep this manual in a safe
place, so that the information is always available. If you
give the equipment to any other person, hand over these
operating instructions and safety regulations as well. We
cannot accept any liability for damage or accidents which
arise due to a failure to follow these instructions and the
safety instructions.

1. Safety regulations

The corresponding safety information can be found in the
enclosed booklet.
Danger!
Read all safety regulations and instructions. Any
errors made in following the safety regulations and
instructions may result in an electric shock, fi re and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
Explanation of the symbols on the equipment (Fig.
23):
1. Warning!
2. Wear safety goggles, a face guard and ear protection.
3. Protect the equipment from rain and damp.
4. Maximum cutting length of the pole-mounted pruner.
5. Electric shock can cause fatal injury. Keep a distance
of at least 10 m from power cables.
6. Read the directions for use before operating the
equipment.
7. Wear sturdy, non-slip footwear.
8. Watch out for falling and catapulting parts.
9. Keep your distance.
10. Wear safety gloves.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Battery
2. Handle
3. On/Off switch
4. Safety lock-off
5. Safety lock-off for the handle angle adjuster
6. Assembly nut
7. Tube
8. Shoulder strap with safety release
9. Additional handle
10. Telescopic tube 1 lock nut
11. Telescopic tube 1
12. Telescopic tube 2 lock nut
13. Telescopic tube 2 with motor housing
14. Safety lock-off for the motor housing angle adjuster
15. Hedge trimmer mounting kit
16. Guard for hedge cutter blade
17. Charging unit
2.2 Items supplied
Please check that the article is complete as specified in
the scope of delivery. If parts are missing, please contact
our service centre or the sales outlet where you made
your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid
bill of purchase. Also, refer to the warranty table in the
service information at the end of the operating
instructions.
•
Open the packaging and take out the equipment with
care.
•
Remove the packaging material and any packaging
and/or transportation braces (if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for transport
damage.
•
If possible, please keep the packaging until the end of
the guarantee period.
Danger!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or
small parts. There is a danger of swallowing or
suffocating!
•
Complete handle
•
Complete tube with motor unit
•
Shoulder strap with safety release
•
Hedge trimmer mounting kit
•
Guard for hedge cutter blade
•
Battery pack (not included in delivery with Art. No.
34.108.00, 34.108.20)
•
Charging unit (not included in delivery with Art. No.
34.108.00, 34.108.20)
•
Original operating instructions
•
Safety instructions

3. Proper use

Hedge trimmer
The hedge trimmer mounting kit can be used only on the
supplied motor head. Caution! This hedge trimmer is
suitable for cutting hedges, bushes and shrubs. Caution!
Do not use this equipment to cut grass.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.