Sensitec NF-3101 Mode D'emploi page 17

Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio,
AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment
due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which the
Model Number or Type Number - by manufacturer is used exceeds
the applicable RF compliance level above, the Model Number or Type
Number - by manufacturer should be observed to verify normal operation.
If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the Model Number or Type
Number - by manufacturer.
Over the frequency range 150 kHz to 80 MHz, field strengths should be
less than [Vi] V/m.
Table 206 - Recommended separation distances between
portable and mobile
RF communications equipment and the Model Number or
Type Number - by manufacturer
Recommended separation distances between
portable and mobile RF communications equipment and the Model
Number or Type Number - by manufacturer
The Model Number or Type Number - by manufacturer is intended for
use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Model Number or Type
Number - by manufacturer can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Model Number or Type
Number - by manufacturer as recommended below, according to the
maximum output power of the communications equipment.
English 17