Advice; Maintenance And Cleaning - Sensitec NF-3101 Mode D'emploi

Under the condition of power off, press "UP" and "DOWN" button
together for two seconds, to display the last temperature measurement.
At this mode if change the order number to 0 and press "MODE"
button, then delete all memory data.
10-8. Changing The Batteries
Display: when the LCD screen displays "
Operation: Open the lid and change the batteries, taking great care
with the correct positioning. A mistake with this could cause damage
to the apparatus and compromise the guarantee of your Non-contact
Body Infrared Thermometer. Never use rechargeable batteries. Use only
batteries for single usage.
Remove the battery from the instrument if it is not required for extended
periods of time in order to avoid damage to the thermometer resulting
from a leaking battery.
10-9. Longevity Use
The Non-contact Body Infrared Thermometer was conceived for an
intense and professional use, its longevity is guaranteed for 40000
takings.

11. Advice

• The protective glass over the lens is the most important and fragile
part of the thermometer, please take great care of it.
• Do not recharge non rechargeable batteries, do not throw in fire.
• Do not expose the thermometer to sunlight or water.

12. Maintenance and Cleaning

• The Infrared Sensor is the most precise part, must be protected
carefully.
• Clean the device with a cotton bud lightly moistened with 70%
alcohol.
• Do not clean the device with corrosive detergent.
• Keep the device away from water or other liquid.
English 11
", the battery is used.