This Appliance Conforms To The Following Standards - Sensitec NF-3101 Mode D'emploi

This message displays in various cases - please find below a list
of the main cases.
Reasons for "LO" or "HI"
message display
Temperature reading hampered
by hair, perspiration...
Temperature hampered by an
air flux.
The measuring distance is too far.
From high/low temperature
condition to room temperature

14. This appliance conforms to the following standards:

• EN 980: Graphical symbols for use in the labeling of medical devices
EN 1041 information supplied by the manufacturer with medical diveces
• EN 60601-1: Medical electrical equipment Part 1: General
requirements for safety (IEC60601 -1:1998)
• EN 60601-1-2: Medical electrical equipment Part 1-2: General
requirements for safety Collateral standard Electromagnetic
compatibility Requirements and test (IEC 60601-1-2:2001)
EMC Statement
This device has been tested and homologated in accordance with
EN60601 -1 -2:2007 for EMC. This does not guarantee in any way that
the device will not be affected by electromagnetic interference. Avoid
using the device in high electromagnetic environment.
Advice
Make sure that there is no
obstruction prior to taking
a temperature.
Make sure there is no air flux
as this could interfere with the
infrared system.
Please respect the measuring
distance (between 1 to 10 cm -
0.39 to 3.9 in).
Waiting for 10 minutes before
taking the body temperature
English 13