Sensitec NF-3101 Mode D'emploi page 16

16 English
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
where P is the maximum output power rating of the transmitter In watts
(W) according to the. transmitter manufacturer and d is the recommended
separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an
electromagnetic site survey, should be less than the compliance level in
each frequency range
Interference may occur In the vicinity of equipment marked with the
following symbol:
NOTE I At 80 MHz end 800 MHz. the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.
3 Vrms 150 kHz
to 80 Mhz
3 V/m
80 MHz to 2.5
GHz
3 Vrms
3 V/m
Recommended
separation
distance
d = 1,2√p
d = 1,2√p,
80MHz to
800MHz
d = 2,3√р,
800MHz to
2,5MHz