Setting The Duration - AEG BCB331051M Notice D'utilisation

Masquer les pouces Voir aussi pour BCB331051M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
www.aeg.com
Clock function
00:00
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day

6.3 Setting the DURATION

1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
COUNT UP TIMER
and
or
to set the hours.
to confirm and switch to set
and the set
or
to set the current
to confirm or the set time of
flashes in the display.
again and again until
or
to set the minutes and
to confirm.
and time
Application
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
2. Press
starts to flash.
3. Press
the minutes for END time.
4. Press
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
shows flashing
5. Press
the minutes for END time.
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
again and again until
or
to set the hours and
to confirm.
and time setting flash
again and again until
or
to set the minutes and
to confirm. The display
.
or
to set the hours and
to confirm.
and time setting flash in the

Publicité

Chapitres

Table des Matières
loading

Table des Matières