Filling The Water Tank; Setting The Temperature - Bosch SensorSteam TDS12 Série Notice D'utilisation

Before using the iron for the irst time
Remove any labels or protective covering from
the soleplate (13).
• With the iron unplugged, ill the tank (11) of the iron
the green light (5) stops lashing and the clear light (3)
starts lashing. Grip the handle (1) and set the steam
• When using the steam function for the irst time, do
• When turned on for the irst time, your new iron may
Filling the water tank
Unplug the iron from the mains!
• Open the illing openning lid (9).
• N ever ill beyond the level mark for maximum
illing (12).
Any damage caused by the use of the aforemen-
tioned products will make the guarantee void.
Setting the temperature
The temperature control (15) adjusts the temperature
of the soleplate (13).
Setting the steam amount (3)
(4)
(1)
SensorSteam
(2)
When plugging the iron in, during the irst minute:
• The green lamp (5) lashes.
(5)
���
���
���