Currency Converter - Sharp Pw-E560 Manuel De Fonctionnement

When to replace the battery
Replace the battery immediately in the following cases:
• When is displayed.
• When the message 'Replace the battery' appears upon turning the power on.
Note:
• If you do not follow the procedure describing the battery replacement, the
History list, as well as the Calculator's memory, may be cleared or altered. Also,
Currency Converter and the Set-up Menu configurations may be reset.
ntity
Replacement procedure
1
1. Switch off the power by pressing o.
2. Set the battery replacement switch located on the
lt in serious bottom of the unit to the 'REPLACE BATTERY' position.
nsult a
3. Remove the battery cover.
4. Remove the used battery and insert the one new
r clothes,
battery. Make sure the battery polarity is correctly
orientated.
he unit from a
5. Replace the battery cover.
6. Set the battery replacement switch to the 'NORMAL
nd damage
OPERATION' position.
7. Open the unit and press o to turn the power on.
The LCD contrast screen will appear.
• If the power cannot be switched on, try following steps 2 through 7 in the
above procedure again. Should this fail, then follow the reset procedure on the
following page.
nit.
8. Follow the instructions on the screen to adjust the LCD contrast, as well as to set
during the
the key sound on/off configuration (see steps 8 through 9 of the procedure on
ner than
page 3.)
Downloaded from www.Manualslib.com
04.7.29, 10:30 AM
manuals search engine
31