Preparing For Use - Wiesenfield WI-CF-200 Manuel D'utilisation

2.3. Safe device use
a) Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
b) Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
c) To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
d) When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be
used.
e) Clean the device regularly to prevent stubborn grime from accumulating.
f) The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
g) It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
h) Keep the device away from sources of fire and heat.
i) Do not overload the device.
ATTENTION! Despite the safe design of the device and its protective
features, and despite the use of additional elements protecting the operator,
there is still a slight risk of accident or injury when using the device. Stay alert
and use common sense when using the device.
3. Use guidelines
The product is intended for feeding poultry on farms and amateurs.
The user is liable for any damage resulting from unintended use of the device.

3.1. Preparing for use

APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
Manual rev. 26-03-2021