Connections; Tv And Blu-Ray Disc Player Connection - Yamaha YRS-700 Mode D'emploi

Connections

• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal.

TV and Blu-ray disc player connection

For the cable connection, follow the orders below.
1
HDMI cable (optional)
Input the digital audio/video signals
of the Blu-ray disc player to this unit.
To AC wall outlet
1
2
1
Video signals
Audio signals
y
1)
Audio return channel (ARC) supported TV
• Connect HDMI cable to audio return channel supported terminal (the
terminal with "ARC" indicated) on TV. In this case, you do not need
to connect optical cable.
• Activate the HDMI control function of this unit (☞p. 21).
6
En
2
HDMI cable (optional)
The digital video of the Blu-ray disc
is reflected on TV.
HDMI
Blu-ray disc player
OUTPUT
R
INPUT1
2 3
HDMI INPUT
INPUT2
3
2)
3
1)
AUDIO L VIDEO
OPTICAL
OUTPUT
(Example)
What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit
through a HDMI cable. By this function, a digital audio pin cable to
connect TV and this unit is not needed.
y
2)
Depending on the setting, HDMI for video signal, optical or coaxial
digital audio or analog audio for audio signal can be selected. Refer to
"Input assignment (☞p. 21)".
Optical cable (supplied)
Play back digital sounds of TV on
this unit.
1. Remove the cap
2. Check the direction of
the plug
TV