Teac CD-RW890 Mode D'emploi page 15

3
When the selection of track numbers has been finished,
press the Play (y) button to start program playback.
The "PROGRAM" indicator stops blinking and lights up. Playback of
the program starts.
To check the programmed order
In the stop mode, press the PROGRAM CHECK button repeatedly to
show the track numbers that have been stored in memory.
<
This cannot be used while the "PROGRAM" indicator blinks.
To add a track to the end of the program
1
Press the PROGRAM button in the stop mode.
2
Press the numeric button to select a track.
track 7:
track 10:
The track is added to the end of the program.
To overwrite the program
1
In the stop mode, press the PROGRAM button repeatedly
until the program number to be changed appears on the
display.
2
Press the numeric button to select a track.
track 7:
track 10:
The track is overwritten to the selected track.
Continue to the next page
15