Time Display; Repeat Playback - Teac CD-RW890 Mode D'emploi

Time Display

Each time the TIME button is pressed, the display changes as
follows:
CD/CD-R/CD-RW playback
(Ex.)
Unfinalized CD-R/CD-RW, stopped
(Ex.)
total number of the tracks
During recording / While recording is paused
(Ex.)
elapsed time of the current track
time remaining for the current track
total elapsed time of the disc
time remaining for the disc
total play time of the disc
remaining recording time of the disc
elapsed recording time of the disc
remaining recording time of the disc

Repeat Playback

Each time the REPEAT button is pressed, the repeat mode changes
as follows:
REPEAT ALL
(off)
REPEAT ALL (Repeat all the tracks)
All the tracks of the disc will be played repeatedly.
REPEAT 1 (Repeat one track)
The track being played will be played repeatedly. If you press the
Skip (.//) button and select another track, the track you
selected will be played repeatedly.
It is also possible to select a track to be repeated in the stop mode.
Press the REPEAT button twice and then select the track number
by pressing the Skip (.//) button. Press the Play (y) button
to start playback.
<
REPEAT ALL or REPEAT 1 playback works with finalized discs only.
<
If one of the following buttons is pressed, repeat mode will be
cancelled:
OPEN/CLOSE (L), POWER
<
During shuffle playback, REPEAT 1 cannot be selected.
REPEAT 1
13