To Stop Playback; To Pause Playback - Teac CD-RW890 Mode D'emploi

total number of the tracks
The disc type indicator shows the type of disc currently loaded.
CD:
A commercial pre-recorded CD
CD-R:
A finalized CD-R
CD-RW:
A finalized CD-RW
CD-R :
NO TOC
A CD-R which has yet to be finalized
CD-RW :
NO TOC
A CD-RW which has yet to be finalized
<
As for non-audio discs, the content may be detected but will not
be played.
<
When no disc is inserted, "NO DISC" appears.
4
Press the PLAY (y) button to start playback.
Disc playback starts from the first track.
<
If you load the disc, and then press the Play (
closing the disc tray, the disc tray closes automatically and playback
starts.
<
When the track number changes during playback of continuous
music such as live performances, the sound may be cut then
played.

To pause playback

Press the Pause (J) button during playback. Playback stops at the
current position. To resume playback, press the Play (y) button or
the Pause (J) button.
disc type indicator
total play time of the disc
y) button without

To stop playback

Press the Stop (H) button to stop playback.
To skip to the next or previous track
During playback, repeatedly press the Skip (.or/) button
until the desired track is found. You can also skip to next or
previous tracks rapidly by holding down the Skip (.or/)
button of the remote control unit. The selected track will be played
from the beginning.
In the stop mode, press the Skip (.or/) button repeatedly
until the track you want to listen to is found, and press the Play (y)
button to start playback from the selected track.
< . button is pressed during playback, the track
When the
being played will be played from the beginning. To return to the
beginning of the previous track, press the . button twice.
<
During programmed playback, the playback skips to the previous
or next track in the program.
Search for a part of a track
During playback, hold down the Skip (. or /) button of
the main unit and release it when the part you want to listen to is
found.
Use the Search (m or ,) button when operating with the
remote control unit.
11