Installation Instructions; Installation Guidelines; Wall Mount Installation - Honeywell 301EMRP Manuel De L'utilisateur

Panneau à distance
Masquer les pouces Voir aussi pour 301EMRP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions

Installation Guidelines

Installation Guidelines
These guide lines must be strictly observed to assure that the
equipment will work properly. If they are not applied, Honeywell will not
recognize any liability in case of improper operation:
Make sure to locate all units easily accessible for proper service.
Avoid any location where units could be subject to vibrations.•Avoid
any location close to any electromagnetic interference.
Avoid any location where there are large temperature swings.
Verify local requirements and existing regulations witch may affect
the choice of location.

Wall Mount Installation

The remote panel must be installed where the display can be easily
read.
Remember to pass all wiring through knock-outs at base of unit.
12
Installation Instructions
301EMRP User Manual
Honeywell
We recommend
installing the monitor
at a height of 1.5 m
from the ground.
• Mark two holes 6
3/8" apart in height
• Mark two holes10
9/16" apart in
width
• Drill 1/4" holes and
prepare as
necessary
• Mount unit with
appropriate
screws
511395
2/07

Publicité

Chapitres

Table des Matières
loading

Table des Matières