Specifications - Yamaha R-N303 Mode D'emploi

Masquer les pouces Voir aussi pour R-N303:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Network
• Input jack: NETWORK x 1 (100Base-TX/10Base-T)
• PC client function
• Compatible with DLNA ver. 1.5
• AirPlay supported
• Internet radio
• Streaming service
• Wi-Fi function
Capable of direct connection with mobile device
Available security method
..................................... WEP, WPA2-PSK (AES), Mixed Mode
Radio frequency band ....................................................... 2.4 GHz
Radio Frequency (Operational Frequency)
............................................................. 2412 MHz to 2472 MHz
Maximum Output Power (E.I.R.P) ...............17.5 dBm (56.2 mW)
Wireless network standard................................ IEEE 802.11 b/g/n
Wi-Fi settings
WPS (Wifi Protected Setup) ............................. Capable of WPS
Capable of sharing with iOS devices by wireless connection.
Bluetooth related function
• Version ............................................................. Bluetooth 2.1 + EDR
• Frequency ............................................................................ 2.4 GHz
• Radio Frequency (Operational Frequency)
................................................................... 2402 MHz to 2480 MHz
• Maximum Output Power (E.I.R.P) ......................4.0 dBm (2.5 mW)
• Wireless Output ....................................................Bluetooth Class 2
• Profiles
Source function
The unit
Sink Device (ex. Bluetooth Headphone)
Profile: A2DP version1.3, AVRCP version1.6
CODEC: SBC
Sink function
The unit
Source device (ex. iPhone/Android)
Profile: A2DP Version1.3, AVRCP version1.6
CODEC: SBC, AAC
Audio
• Minimum RMS output power
(40 Hz to 20 kHz, 0.2% THD, 8 )
[North America, General, Korea, Australia, U.K. and
Europe models].................................................. 100 W + 100 W
[Asia model] ............................................................. 85 W + 85 W
• Dynamic power per channel (IHF) (8/6/4/2 )
........................................................................125/150/165/180 W
• Maximum power per channel (1 kHz, 0.7% THD, 4 )
[U.K. and Europe models] .................................................. 115 W
• IEC power (1 kHz, 0.2% THD, 8 )
[U.K. and Europe models] .................................................. 110 W
• Damping factor (SPEAKERS A)
1 kHz, 8 .................................................................... 120 or more
• Maximum effective output power
(1 kHz, 10% THD, 8 )
[General model] .................................................................. 140 W
[Asia model] ....................................................................... 125 W
• Input sensitivity/input impedance
CD, etc. ..................................................................500 mV/47 k

Specifications

• Maximum input signal
CD, etc. (1 kHz, 0.5% THD)..................................................2.2 V
• Output level/output impedance
CD, etc. (input 1 kHz, 500 mV)
LINE OUT ......................................................... 500 mV/2.2 k
PHONES (8 load).............................................. 470 mV/470
• Frequency response
CD, etc. (20 Hz to 20 kHz) ...........................................0 ± 0.5 dB
CD, etc. (10 Hz to 100 kHz) .........................................0 ± 3.0 dB
• Total harmonic distortion
CD, etc. to SPEAKERS OUT
(20 Hz to 20 kHz, 50 W, 8 ) ..................................0.2% or less
• Signal to noise ratio (IHF-A)
CD, etc. (input shorted, 500 mV).......................... 100 dB or more
• Residual noise (IHF-A) .......................................................... 70 μV
• Channel separation
CD, etc. (5.1 k input shorted, 1 kHz/10 kHz)
......................................................................... 65/50 dB or more
• Tone control characteristics
BASS
Boost/cut (50 Hz) ...........................................................± 10 dB
TREBLE
Boost/cut (20 kHz) .........................................................± 10 dB
• Digital input (OPTICAL/COAXIAL)
Support audio sample rate
...... 32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz
FM
• Tuning range
[North America model] ................................... 87.5 to 107.9 MHz
[General and Asia models]
....................................87.5 to 107.9 MHz/87.50 to 108.00 MHz
[Korea, Australia, U.K. and Europe models]
................................................................... 87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF-A, 1 kHz, 100% MOD.)
Mono ....................................................................3 V (20.8 dBf)
• Signal to noise ratio (IHF-A)
Mono/stereo ............................................................... 65 dB/64 dB
• Harmonic distortion (1 kHz)
Mono/stereo ..................................................................0.5%/0.6%
• Antenna input .......................................................... 75 unbalanced
AM (R-N303)
• Tuning range
[North America model] .......................................530 to 1710 kHz
[General and Asia models] ...... 530 to 1710 kHz/531 to 1611 kHz
[Korea and Europe models] ................................531 to 1611 kHz
DAB (R-N303D)
• Tuning range ..............................................174-240 MHz (Band III)
• Support audio format
........................ MPEG 1 Layer II/MPEG 4 HE AAC v2 (AAC+ v2)
• Antenna input ......................................................... 75 , unbalanced
Specifications
53
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R-n303 d

Table des Matières