Initialvolume; Autopowerstby (Auto Power Standby) - Yamaha R-N303 Mode D'emploi

Configuring various functions (SETUP menu)

InitialVolume

Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, 1 to 99 (1step increments), Max
Default
Off
AutoPowerStby
(Auto Power Standby)
Enables/disables the auto-standby function. If you do not
operate the unit for the specified time, the unit will
automatically go into standby mode.
Does not set the unit to standby mode
Off
automatically.
Sets the unit to standby mode automatically.
While NET or BLUETOOTH is selected as the
input source, the unit will switch to standby mode
if the selected source is not played back for 20
On
minutes.
For all input sources, the unit will switch to
standby mode if it is not operated for 8 hours.
Default
U.K. and Europe models: On
Other models: Off
Note
Just before the unit enters standby mode, "AutoPowerStby"
appears and then countdown starts in the front display.
42
En