Auto Preset - Yamaha R-N303 Mode D'emploi

DIMMER
A
OPTICAL
LINE 1
TUNER
TUNER
BAND
BAND
MEMORY
CLEAR
Cursor keys /
ENTER
HOME
SETUP
NOW PLAYING
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION on the remote control.
The "OPTION" menu is displayed (p. 37).
3
Use the cursor keys (
Preset", and then press ENTER.
OPTION

Auto Preset

READY
01:FM 87.50MHz
Preset number
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, press ENTER.
Note
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i or cursor keys ( / ) on
the remote control.
• To cancel scanning, press RETURN.
When scanning is complete, "FINISH" is displayed and
then the display returns to original state.
SLEEP
B
SPEAKERS
COAXIAL CD
LINE 2 PHONO
NET BLUETOOTH
TUNING
PRESET
PRESET j / i
MODE DISPLAY
ENTER
RETURN
RETURN
OPTION
OPTION
VOLUME
MUTE
/ ) to select "Auto
SP A
SP A
Frequency
■
Registering a radio station manually
BAND
MEMORY
MEMORY
CLEAR
HOME
SETUP
NOW PLAYING
1
Tune in to the desired radio station.
See "FM/AM tuning" (p. 22).
2
Press MEMORY.
Note
By holding down MEMORY for more than 3 seconds, you
can skip the following steps and automatically register the
selected station to an empty preset number (i.e., the preset
number following the last preset number used).
3
Press PRESET j / i to select the preset
number to which the station will be
registered.
When you select a preset number to which no station
is registered, the message "Empty" is displayed.
99.15
03: Empty
"Empty" (not in use) or the frequency
currently registered.
4
Press MEMORY.
When registration is complete, the display returns to
the original state.
Note
To cancel registration, press RETURN or do not perform any
operations for about 30 seconds.
Listening to FM/AM radio
TUNING
PRESET
PRESET j / i
MODE DISPLAY
ENTER
RETURN
OPTION
VOLUME
MUTE
23
En