Sharing The Ios Device Setting - Yamaha R-N303 Mode D'emploi

■
Connecting without a wired router or wireless router (access point)
Connecting wirelessly to a mobile device
(Wireless Direct)
Note
When the unit is connected to the network with Wireless Direct, it cannot connect to any other wireless router (access point). To play
back contents from the Internet or to update the firmware of this unit over the network, connect the unit to a network with a wired router
or wireless router (access point).

Sharing the iOS device setting

You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPad/iPod
touch).
Before proceeding, confirm that your iOS device is
connected to a wireless router (access point).
Note
• If you perform the following procedure, all network settings will be
initialized.
• This configuration does not work if the security protocol of your
wireless router (access point) is WEP. In this case, use another
connection method.
CLEAR
Cursor keys /
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press SETUP.
2
Use the cursor keys (
"Network" and press ENTER.
Note
To return to the previous state, press RETURN.
3
Use the cursor keys (
"Connection" and press ENTER.
4
Use the cursor keys (
"Wireless" and press ENTER.
WIRELESS
¡WPS
MODE DISPLAY
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
/ ) to select
/ ) to select
/ ) to select
Connect wirelessly with Wireless
Direct (p. 17)
5
Use the cursor keys (
Setting" and then press ENTER twice.
Note
When connected to a wired network, the front display will show
the messages "LAN CBL" and "Pls disconnect". Unplug the
network cable from the unit, and press the ENTER key.
6
On the iOS device, select the unit as the
AirPlay speaker in the Wi-Fi screen.
Example (iOS 10)
7
Check that the "Network" field is set to your
preferred network, and then tap "Next".
When the sharing process finishes, the unit is
automatically connected to the selected network
(access point).
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 18).
Connecting to a network
/ ) to select "Share
The name of this unit
Tap here to start setup
The network currently
selected
15
En