Stand-By Function - Smeg Lavazza A MODO MIO Mode D'emploi

EN I T
Fit the supply plug into the power outlet.
Press one of the switch-on/supply buttons to switch
the macchine on.
The coffee machine starts the heating cycle.
The switch-on/supply buttons will start blinking to
a white light.
During the heating cycle, you can book the drink,
pressing one of the switch-on /supply buttons. The
drink will be released after the end of the heating cycle.
The machine will be ready for use when the switch-
on/ supply buttons light up to a steady white light.
MACHINE SETTING
At first power-on, supply at least 17.5 oz (0.5 L) of
water without capsule placing a container under the
coffee spout.
Since the machine's hydraulic circuit is empty, the ma-
chine may automatically make up to five attempts at
supplying, to ensure that the circuit will be filled up.

STAND-BY FUNCTION

In order to ensure energy saving, the machine will be
set to a low-consumption mode after it has not been
used for two minutes, and will be automatically set
to the stand-by mode after it has not been used for
seven more minutes.
The machine can be set to the stand-by mode man-
ually, first of the 9 minutes' time, by keeping both
buttons pressed down for at least 3 seconds
This mode is indicated by the switching off of the
buttons.
The machine can be reactivated by pressing either
button.
26