Smeg Lavazza A MODO MIO Mode D'emploi page 36

EN I T
Problem encountered
Water leaks at the rear side
of the coffee machine.
Water leaks at the front side
of the coffee machine.
The capsule does not fall
down to the used capsule
collecting tray.
The loading lever does not
reach the supply position or
requires an excessive closing
effort.
Espresso button with orange
flashing light and Espresso
lungo button off.
Buttons with white lights and
blinking fast.
TROUBLESHOOTING
Possible causes
» Tank not inserted correctly.
» Tank damaged.
» Spent capsule drawer not
inserted correctly.
» Spent capsule drawer filled.
» Capsule stuck.
» Capsule not compatible.
» Capsule got stuck or adhered » Lift and lower the capsule loading lever. If this is
» Spent capsule drawer filled.
» Capsule fitted incorrectly.
» Machine broken.
» Spent capsule drawer filled.
36
Solution
» Insert the tank correctly.
» Check for leaks in the tank keeping it separate
from the machine .
» If the problem remain please contact L.C.S.*
» Insert the spent capsule drawer correctly.
» Empty the spent capsule drawer and the drip tray.
» Lift and lower the capsule loading lever. If this is
not enough, disconnect the machine from power
mains and operate manually to remove the capsule
from the duct.
» Use Lavazza A MODO MIO capsules or
compatibles.
» If the problem remain please contact L.C.S.*
not enough, disconnect the machine from power
mains and operate manually to remove the capsule
from the duct.
» If the problem remain please contact L.C.S.*
» Empty the spent capsule drawer.
» Lift and lower the capsule loading lever. If this is not
enough, disconnect the machine from power mains
and operate manually to remove the capsule from
the duct.
» If the problem remain please contact L.C.S.*
» Contact Lavazza Customer Service.*
» Empty the spent capsule drawer and press one of
the power on/supply buttons to reset the machine.