Display And Control Elements; Display - TESTO 175 Mode D'emploi

6 Display and control elements

Pos: 29 /TD/Produktbeschreibung/Übersicht/testo 175/Anzeige- und Bedienelemente, Display @ 6\mod_1274956795162_79.doc @ 61948 @
6 Display and control elements

6.1. Display

The display function can be switched on/off via the
software testo ComSoft.
Depending on the operating status, various
information may be shown in the display. A detailed
representation of the information that can be called
up can be found under Menu overview, page 48.
For technical reasons the display speed of liquid
crystal displays becomes slower at temperatures
below 0 °C (approx. 2 seconds at -10 °C, approx. 6
seconds at -20 °C). This has no influence on the
measuring accuracy.
testo 175 T1
1 Highest saved reading
2 Lowest saved reading
3 Reading
4 Units
5 Measurement program over
6 Measurement program running
7 Wait for start of measurement program
8 Start criterion Date/ Time programmed
9 Battery capacity
42