Display And Control Elements; Display - TESTO 176 Mode D'emploi

5 Display and control elements

4. Open the cover.
5. Plug the USB cable into the Mini USB port (1).
6. Configure the data logger, see separate operating instructions
testo Comfort Software.
5 Display and control elements
5.1.

Display

44
The data loggers testo 176 T1, testo 176 T3, testo 176 H2
have no display.
The display function can be switched on/off via the testo
Comfort Software.
Depending on the operating status, various information may
be shown in the display. A detailed representation of the
information that can be called up can be found under Menu
overview, page 50.
For technical reasons the display speed of liquid crystal
displays becomes slower at temperatures below 0 °C
(approx. 2 seconds at -10 °C, approx. 6 seconds at -20 °C).
This has no influence on the measuring accuracy.