Using The Product; Connecting A Sensor; Programming Data Logger; Service & Support - TESTO 176 Mode D'emploi

6

Using the product

6.1.

Connecting a sensor

Observe the following points when connecting sensors to data
logger and measuring points.
> Ensure correct polarity of the plugs.
> Press the plugs firmly into the ports to ensure leak tightness.
However, do not apply force!
> Make sure that the plugs are firmly connected to the data logger
or that the connections are closed with blanking plugs.
> Ensure correct positioning of the sensor to avoid disturbing
influences affecting the measurement.
> testo 176 T2, testo 176 T3, testo 176 T4, testo 176 H1, testo
176 H2, testo 176 P1: Make sure that you connect the
configured (with the testo Comfort Software) sensors to the
individual connections. The numbers of the connections are
printed on the housing.
6.2.

Programming data logger

In order to adapt the programming of your data logger to your
individual requirements, you require the testo Comfort Software
Basic 5 software. It is available in the Internet as a free download
requiring registration www.testo.com, International,
Service&Support Download
|
The instructions for the installation and operation of the
software can be found in the testo Comfort Software Basic
5 instruction manual that is downloaded together with the
software.
Center.
6 Using the product
49